Plumbing can cost a lot of money, so being prepared and knowing how to take care of your plumbing can be very beneficial to you and your wallet. By knowing how to take care of your plumbing, you can save time and save yourself a lot of money, in the end.
If a pipe ever freezes, you need to make sure to shut off the water. This will keep the pipe from bursting and causing you major damage to your home. Make sure to shut the water off at the main valve, and then open the faucet that is closest to the frozen pipe so it can drain while it is thawing out.
To eliminate the possibility of having frozen pipes, maintain a constant temperature in your home above freezing, and be certain to adequately insulate those pipes that are out in the weather. Pipes have the potential to freeze if the surrounding temperatures are below the freezing mark. Even in the best case scenario, it will take hours for thawing to happen before you have running water again. However, they could burst, which would cause a huge mess and an extremely big repair bill.
If your pipes are prone to freezing, let the water trickle continuously in at least one faucet during weather that is below freezing. This will minimize the chances that the pipes will freeze and leave you without water. If water is continually running through the pipes and trickling out of a faucet, the pipes are less likely to freeze.
Check your gas water heater periodically to make sure the pilot flame is lit. The correct color for this flame should be blue. The tip of the flame should be yellow. If you find that you are only seeing a yellow flame, you may need to call a professional for safety reasons.
One way to prevent pipes from freezing during the winter is to keep cabinet doors in your house that contain the pipes open. This can insure that they get adequate heat to keep warm. Make sure also, to unhook and kind of hose outside and run a little water to clear the pipes of any remaining water going outside.
To avoid sediment buildup, drain gallons of water from your water heater to flush any corrosion. This will help your heater to run more efficiently therefore saving you regular energy costs. Make sure to read your heater’s instructions before attempting this, and do this periodically to make sure that your heater is running as well as it can.
Get a good quality replacement shower head. Some people think they can get away with the cheapest version at the store. These types of fixtures are prone to breakage and are much less sturdy.
Clean the lint trap in your dryer. This is preventative maintenance that will prevent many problems, including fires. Also, check the lint trap to see if there are telltale signs that lint may be leaking into your pipes through holes and tears.
If your toilet is constantly developing moisture on the outside, you may want to consider turning up the heat in your bathroom. The biggest cause of “sweaty” toilets is cool and moist air. Believe it or not, this moisture could actually cause damage to your toilet, so it is crucial that you fix the problem.
If water is backing up into multiple fixtures all over the house, it is no longer going to be effective for you to use chemicals or a small hand snake. This is evidence of a blockage in the main line, and you must contact a professional to take care of this problem for you.
When it gets cold out, ensure that your faucets outside aren’t dripping or leaking. You will have to fix this potential problem before freezing temperatures come. Pipes that are made of copper, steel, or plastic are vulnerable to cracking when water freezes and increases the pressure. Even the most minute crack can cause a big enough leak to create flooding or water damage and mold in your home.
By knowing your plumbing and how it works, as was stated before, can save you a lot of time and money. There’s nothing worse than a plumbing accident to mess up your day. So, using the advice from this article, you can be sure to save yourself a big headache!